lamberti-spa

Gypsum Based Dry Mix - White or Coloured Skim Coat

Products

Esacol 50D1

Esacol 50D1 is a hydro-colloid soluble both in hot and cold water. Special modifications make it suitable as a thickener and a water retentive agent.

 

Chemico-physical characteristics:

Chemical description: non-ionic modified polysaccharide

pH: 6.0-8.0 (2% w/w water sol)

Appearance: free-flowing ivory powder

Moisture: < 4%

Bulk density: 0.60-0.80 g/ml

Particle size: 99.9% < 35 mesh

Solubility: complete in hot and cold water

Brookfield RVT viscosity: 8000 – 10000 mPa*s (2% w/w solution, 20’C, 20 rpm)

 

Applications and dosages:

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.15-0.30%

Esa-one EL800

Esa-one EL800 is a binder based on minerals and natural or synthetic polymers, soluble in water. It has been specially developed for the additivation of finishing plasters based on gypsum or calcium carbonate, applied on interior walls.

 

Physical and chemical characteristics:

Chemical nature: binder based on synthetic and natural polymers

Aspect: fine powder

Praticle size distribution: below 1% at the sieve 200um

Solubility: total in cold water

Esacol 60H1

Esacol 60H1 is a hydro-colloid soluble both in hot and cold water. Special modifications make it suitable as a thickener and a water retentive agent.

 

Chemico-physical characteristics:

Chemical description: non-ionic modified polysaccharide

pH: 6.0 – 8.0 (2% w/w water sol.)

Appearance: free-flowing ivory powder

Moisture: < 4%

Bulk density: 0.6 – 0.8 g/ml

Particle size: 99.9% < 35 mesh

Solubility: complete in hot and cold water

Brookfield RVT viscosity: 9000 – 12000 mPa*s (2% w/w solution, 20’C, 20 rpm)

 

Applications and dosages:

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.15-0.30%

Esa-one Finish XL

Esa-one Finish XL is a binder based on minerals and natural or synthetic polymers, soluble in water. It has been specially developed for the additivation of a finishing plasters based only on calcium carbonate, applied on building walls.

 

Physical and chemical characeristics:

Chemical nature: binder based on synthetic and natural polymers

Aspect: fine powder

Praticle size distribution: below 1% at the sieve 200um

Solubility: total in cold water

Set time: no set, drying

Esacol HS 26 S

Esacol HS 26 S is a hydrocolloid belonging to the polysaccharides family, both in hot and cold water, suitable as thickener, rheology modifier and water retention agent

 

Chemico-physical characteristics:

Chemical description: non-ionic modified polysaccharide

pH: 6.0 – 8.0 (2% w/w water sol.)

Appearance: ivory-flowing powder

Moisture: < 3.4%

Bulk density: 0.6 – 0.8 g/ml

Particle size: 99.9% < 35 mesh

Solubility: complete in hot and cold water

Brookfield RVT viscosity: 8000 – 11000 mPa*s (2% w/w solution, 20’C, 20 rpm)

 

Applications and dosages:

Gypsum/lime plasters:

0.15-0.30%

Cement/lime plasters:

0.30-0.50%

Esacol MX 110

Esacol MX 110 is a thickener/water retention agent coming from natural raw materials, designed to improve the workability and the ease of spreading gypsum-based plasters. Can be easily mixed with all other additives. The high pseudo-plasticity of this special modified polysaccharide leads to very good flowing ability into the spray machine’s pipes.

 

Chemico-physical characteristics:

Chemical description: non-ionic modified polysaccharide

pH: 6.0 – 8.0 (2% w/w water sol.)

Appearance: free-flowing ivory powder

Moisture: < 4%

Bulk density: 0.6 – 0.8 g/ml

Particle size: 80% < 140 mesh

Solubility: complete in hot and cold water

Brookfield RVT viscosity: 6000 - 8000 mPa*s (2% w/w solution, 20’C, 20 rpm)

 

Applications and dosages:

Gypsum/lime plasters:

0.16-0.30%

Esacol MX 44

Esacol MX 44 is a hydro-colloid soluble both in hot and cold water, belonging to the family of modified polysaccharides. Special modifications make it suitable as a thickener and a water retentive agent.

 

Chemico-physical characteristics:

Chemical description: non-ionic modified polysaccharide

pH: 6.0 – 8.0 (2% w/w water sol.)

Appearance: ivory-flowing powder

Moisture: < 5%

Bulk density: 0.6 – 0.8 g/ml

Particle size: 95% < 60 mesh ASTM

Solubility: complete

Brookfield RVT viscosity: 6000 - 8000 mPa*s (2% w/w solution, 20’C, 20 rpm)

 

Applications and dosages:

Gypsum-based finishing plaster:

0.10-0.30%

Gypsum-based adhesive:

0.20-0.40%

Esamid Range

Esamid Products are chemically modified starch ethers, developed as special thickeners for the application in the building field. Products should be combined with rheology modifiers, water retention and air entraining agents of the esacol and esapon range.

 

Chemical-physical characteristics:

Chemical description:

Esamid NA: etherified starch

Esamid HP: etherified starch

Esamid TC: etherified starch

pH:

Esamid NA: 10-12 (5% w/w water sol)

Esamid HP: 7.0 – 10.5 (5% w/w water sol)

Esamid TC: 6-8 (5% w/w water sol)

Appearance:

Esamid NA: white powder

Esamid HP: white powder

Esamid TC: white powder

Moisture:

Esamid NA: max 7%

Esamid HP: max 7%

Esamid TC: max 7%

Solubility:

Esamid NA: complete in hot and cold water

Esamid HP: complete in hot and cold water

Esamid TC: complete in hot and cold water

Brookfield RVT viscosity:

Esamid NA: 800 – 1400 mPa*s (5% w/w water sol, 20’C, 20 rpm)

Esamid HP: 300 – 700 mPa*s (5% w/w water sol, 20’C, 20rpm)

Esamid TC: 800 – 1200 mPa*s (5% w/w water sol, 20’C, 20 rpm)

 

Application and dosages:

Gypsum/lime based plaster:

0.02%

Gypsum stucco and tile grout:

0.02%

Tile adhesive:

0.02%

Cement/lime based plaster:

0.02%

Esapon 1850 C

Esapon 1850 C is a surfactant for gypsum and/or cement-based plasters able to introduce efficiently the air into these systems during mixture preparation. Product should be used in combination with the water retention agents and the rheological modifiers of the esacol and esamid range.

 

Chemico-physical characteristics:

Chemical description: etoxylated alcool

Appearance: fine white powder

pH: 6.0 – 7.5 in water solution (5% w/w)

Bulk density: 0.3 – 0.4 g/cm3

Particle size: 98% > 500 micron ASTM

Solubility: complete

 

Applications and dosages:

Cement plaster:

0.01%

Gypsum plaster:

0.01%

Coloured cement finishing plaster:

0.01-0.02%

Tile grout:

0.01%

Esapon 1851

Esapon 1851 is a surfactant for gypsum and/or cement-based plasters able to introduce efficiently the air into these systems during mixture preparation. Product should be used in combination with the water retention agents and the rheological modifiers of the esacol and esamid range.

 

Chemico-physical characteristics:

Chemical description: etoxylated alcool

Appearance: fine white powder

pH: 6.0 – 7.5 in water solution (5% w/w)

Bulk density: 0.3 – 0.4 g/cm3

Particle size: 95% < 630 micron ASTM

Solubility: complete

 

Applications and dosages:

Cement plaster:

0.01%

Gypsum plaster:

0.01%

Coloured cement finishing plaster:

0.01-0.02%

Tile grout:

0.01%